Close





  • Congratulations this month goes to Marshall Corrie (FEP UsernameCONMECH) and his 1984˝ 20th Anniversary Edition 2.3 Turbo Hatchback (1 of 362) as the Ride of the Month. Marshall was originally introduced to the Mustang in June of 2014 when Mike Malone (at6svo) wanted to advertise the car for sale. Mike began doing some research on the Mustang after finding out about it’s “1 of 362” factor Marshall decided he had to have it. A few weeks later a deal was struck and the Anniversary edition was his.



    The 1984˝ Mustang is a rare car, but that didn’t stop Marshall from making some modifications to it as he brought the car back to life. The GT350 is @ 75% stock, but Marshall felt a minor “resto-mod” with period correct parts was in order to fully enjoy the Mustang. The 2.3 Turbo was upgraded using some OEM Ford parts from the Mustang SVO, which included a SVO intercooler and 1986 E6 exhaust manifold. The exhaust was further upgraded with a 3” down pipe Magnaflow catalytic converter and muffler that ultimately terminated into a set of LX polished stainless steel tail pipes. The fuel system received a set of 42lb injectors to feed the turbo power and a Thunderbird Turbo Coupe serpentine accessory drive setup was added to clean up the front of the engine.



    Once the drivetrain and engine were all sorted out, Marshall turned his attention to the suspension upgrades. These included a set of Eibach Sport line springs with urethane spring isolators and KYB GR2 struts/shocks at all four corners. The suspension was further upgraded by a set of urethane sway bar end links and a full 1987-93 V8 front brake upgrade with braided steel lines. Ford did such a great job with the 20th Anniversary Edition exterior that Marshall felt there was little room for improvement. A set of rear window louvers were added to protect the hatch area from the California sun. The stock TRX wheels were swapped for a set of Boyd Coddington Stars (16 x 7) due to the original TRX tires becoming so expensive and hard to obtain. Once LMR released the new 16” TRX replica wheels they took over eye candy duty on the Mustang.



    Marshall has been able to take the Mustang to a few shows in California that include the JBA Ford Festival 2015, which celebrated the Art of the Mustang book release. The GT350 was awarded the BEST FOX BODY OVERALL award of the show. The 1984˝ Mustang was featured in the hard back edition of ‘Art of the Mustang’ by Donald Farr.



    One of the most challenging aspects for Marshall with the GT350 was getting the car registered in California. Anyone living in California understands all the trials and tribulations required when dealing with the DMV and a vehicle that has been non-operational for a few years. This was all due to the familiar story about a Fox body that almost met it’s demise like so many others. The original 2.3 Turbo had been removed by a previous owner to make way for a 5.0 V8 so the Mustang could be flogged down the strip at Barona’s 1/8 mile track. Luckily Mike Malone (at6svo) was able to rescue the car from that fate, and ultimately sold the car to Marshall to bring back to life. Marshall wanted to send out a very heart felt ‘Thank You!’ to Mike for all of the work he put into this gem and for giving him the opportunity of owning such an awesome little piece of Mustang history. A very special thank you to Chad (chads84svo) as one of the primary parts suppliers, after Mike. A Thank You to all of the others who pitched in with parts and information, such as Scott Moen (WISMACH1) for the information regarding build number break down.
    Comments 13 Comments
    1. tORMENtOR's Avatar
      tORMENtOR -
      Congrats Marshall
    1. Fearnot's Avatar
      Fearnot -
      Congrats Marshall! What a great looking GT350. Now, get that rear in it and get to putting some miles on it!
    1. fascat's Avatar
      fascat -
      Beautiful car Marshall! Well deserved ROTM!
    1. JTurbo's Avatar
      JTurbo -
      Congrats!!!
    1. PaceFever79's Avatar
      PaceFever79 -
      Congratulations
    1. Dadsccat's Avatar
      Dadsccat -
      Congratulations Marshall. The car looks great
    1. conmech's Avatar
      conmech -
      Thanx guys. I appreciate the votes and comments.
    1. Hemlock's Avatar
      Hemlock -
      Congrats Marshall! The car is looking great!

      Robert
    1. Hemlock's Avatar
      Hemlock -
      Double post, please erase
    1. escogt's Avatar
      escogt -
      Congrats, Marshall!!! Awesome car!!!
    1. 4-barrel Mike's Avatar
      4-barrel Mike -
      2.3T FTW! Any fool can drive a V8 Mustang.

      Mike
    1. John Kirkland's Avatar
      John Kirkland -
      Congratulations! Sweet 4i
    1. RazorbackGT's Avatar
      RazorbackGT -
      Man, what a great looking car! I would love to have that.
    Untitled Document
  • New Classified Posts

    OX1

    High roller 86 capri

    This is the kind of build that a you better LOVE if you buy it, as in forever.
    Resale is really not going to happen (for anywhere near that kind

    OX1 05-14-2022, 08:43 AM Go to last post
    79GhiaCoupe

    79-82 Tailights and other parts

    Fender Extension sold

    79GhiaCoupe 05-13-2022, 05:13 PM Go to last post
    noac

    High roller 86 capri

    i can’t see a car like this bringing more than 5G.....gonna be real hard to find the guy looking for a car like this and has 50k to blow.

    noac 05-13-2022, 11:34 AM Go to last post
    79Coupe

    High roller 86 capri

    People are still asking insane prices, but I don't think they are selling. I've seen 93 Cobras listed for 80K

    79Coupe 05-13-2022, 08:45 AM Go to last post
    MIKE'SVO86

    High roller 86 capri

    $48,995.00 No typo. Seen 93 Cobras listed for north of that these days.

    MIKE'SVO86 05-13-2022, 08:41 AM Go to last post
    noac

    High roller 86 capri

    Probably 5000 not 50000, seems like a typo.

    noac 05-12-2022, 08:30 PM Go to last post
  • Recent Forum Posts

    grtskydog

    Return Line for EFI Conversion

    Yep, I think the CFI cars had a low pressure pump in-tank to move it out and a HP pump in-line to push it. I had a CFI GT way back in college and seem

    grtskydog Yesterday, 09:23 PM Go to last post
    Cokeologist

    81 Mustang I6 3.3L Engine - Factory Original Color??

    Hello, can someone advise as to the correct factory original color for the 81 Mustang I6 3.3L engine. I know the valve cover should be Ford blue, but

    Cokeologist Yesterday, 08:34 PM Go to last post
    massacre

    2022 what did you do to your fox today?

    Welded in a patch for my pass side footwell, in the corner. Been that way since i bought the car 2yrs ago. Drivers side is the same/worse but my garage

    massacre Yesterday, 06:13 PM Go to last post
    85MUSTANGTGT

    1985 GT Build

    Thanks. Yup, that's exactly what it is. Brass stock from the hardware store and Sullivan threaded rods and rod ends from the hobby shop.

    85MUSTANGTGT Yesterday, 03:56 PM Go to last post
    flyboy60

    1985 GT Build

    I see a lot of R/C model airplane linkage parts in that solution.
    Way to go.....very nice

    flyboy60 Yesterday, 12:00 PM Go to last post
  • Follow & Like FEP!

    Instagram