Close





  • Congratulations to Joe (FEP Username: tORMENtOR) and his 1984 Mustang GT Turbo. Joe wanted to tell the story of his GT Turbo in his own words. So here they are for all to enjoy.

    I had first seen this 84 GT Turbo back in 2009 when it turned up for sale here on FEP. My thoughts were it was a perfect match to my 84GT T-top being almost the opposite but yet similar in its characteristics. As it turned out timing was off for me, with a stable already full of Stangs I needed to sell one off first and it turned out I missed out on the car and it was traded for a S10. I figured the car would turn up again somewhere but from 2010-16 it never turned up anywhere and I only knew it was in the Southeast somewhere. Weekly searches on Cragislist and mustang forums always came up empty & no luck from the previous owner. I even kept a picture of the car on my phone when friends would ask if I was going to buy another car I would show them the pic of the GT Turbo. Well as luck would have it in June of 2016 Homer302 posted pictures from a car show in Greensboro NC and there was the GT Turbo, finally I knew it's whereabouts. I found out from Homer302 the car was also for sale, now in a panic I had to get so I put a wanted ad on Craigslist in Greensboro and within 5 days the owner contacted me and a deal was made. The car was in practically the same shape it was in 2009. It must have been fate because my good friend Rob(83GTRAG) was heading to North Carolina that Friday so we headed down to pick it up. My search was now over and I finally have the perfect stable mate 84GT's. Since owning the car I revived the original paint, swapped a 84.5 front bumper cover and many other maintenance and upgrade performance parts. Future plans call for some vintage Recaro seats & some more drvetrain upgrades. I plan on having the GT Turbo at all the big Ford & Mustang shows in Pennsylvania this 2017 season.



    Joe's Mustang has 108k miles with original 1E Silver paint. The original front cover was swapped out for an 84.5 GT front cover with fog lights. Joe also add a Cowl Concepts Gauge Pod with Autometer, Boost,Oil,Water Temp Gauges. The 2.3L runs a -Bo-Port 1.5 Cam, Stinger Front Mount Intercooler, 36lb injectors, Megasquirt ECU, Bob Log Header 3inch exhaust, and all this power is held in place by a set of ChuckW motor mounts. The T-5 transmission utilizes a Spec Stage 2 clutch and pressure plate, and gears are changed via MGW shifter. The 7.5 rear end was swapped for an 8.8 with 3.55 gears.



    The stock suspension has been upgraded with the full Maximum Motorsports Grip Package. To handle the extra cornering speeds a set of Cobra brakes have been installed. The brakes are accented by a set of 17x8 Bullet wheels with Kumho XS tires. The interior upgrades include an 86 GT steering wheel, a set of custom GT Turbo floor mats, a Cobra shifter knob, and an SVO speedometer.



    Congratulations once again to Joe and his 1984 Mustang GT Turbo as the Ride of the Month!

    Comments 19 Comments
    1. homer302's Avatar
      homer302 -
      This car is awesome and I believe it found right owner. Well deserved. Congratulations
    1. ddx77's Avatar
      ddx77 -
      Awesome Mustang, great looking all around! Congrats!
    1. Bigs85GT's Avatar
      Bigs85GT -
      Very nice car looks good!
    1. burntorange84's Avatar
      burntorange84 -
      Congrats. very nice. I still toy with the idea of painting the headlight covers like the 85-86's. Silver seems to work well.
    1. tORMENtOR's Avatar
      tORMENtOR -
      Thanks guys
    1. NY5speed's Avatar
      NY5speed -
      Love it
    1. JTurbo's Avatar
      JTurbo -
      Congrats, can't wait to see it at Carlisle.

      JT
    1. RazorbackGT's Avatar
      RazorbackGT -
      Those wheels look awesome on that car. Perfect.
    1. escogt's Avatar
      escogt -
      Congrats & well deserved, brother!!! I have had the pleasure to have rode in this 'beaut!!! What a thrill that was!! Runs just as well as it looks... stellar!!!
    1. 83GTRAG's Avatar
      83GTRAG -
      Great story and happy for Joe and the Mustang FEP world. You can guarantee this car will be well taken care of. I got to enjoy in his excitement as we went to pick it, his first peak at the car and the cruise bringing her home. Lifetime memories
      CONGRATS Joe
    1. 86MustangGtRob's Avatar
      86MustangGtRob -
      Great story, car looks amazing with the scenery!
    1. Lubner's Avatar
      Lubner -
      Very Nice Congrats Joe!
    1. fascat's Avatar
      fascat -
      Great story and great photos. So glad you finally got the car after all those years. Congrats! It is beautiful.
    1. 86ragtop's Avatar
      86ragtop -
      Nice Joe,congrats! Hope to see in person.
    1. racecapri1's Avatar
      racecapri1 -
      Love the turbo GT! Nice
    1. Crimson_Stang's Avatar
      Crimson_Stang -
      Awesome!!!!
    1. EJSVO's Avatar
      EJSVO -
      Joe:

      Nicely done !

      Terrific looking Ride
    1. Big Block RS's Avatar
      Big Block RS -
      WOW a great looking GT Turbo! I have a stock Black 84 GT turbo as well. Did you change the speed density to mass air? Air box area is different from mine
    1. 86-TC/SVO's Avatar
      86-TC/SVO -
      Nah, he just removed the factory air cleaner box and put an open end K&N filter on the end of the VAM. Makes a big difference.
    Untitled Document
  • New Classified Posts

    wraithracing

    87 Thunderbird seats

    Shipping is going to be expensive no matter how you do it due to size and weight. The best way I have found to ship seats is to separate the back of the

    wraithracing 10-15-2021, 08:13 AM Go to last post
    85WhiteGT

    87 Thunderbird seats

    Thanks for the offer, but shipping would be killer.

    85WhiteGT 10-14-2021, 06:12 PM Go to last post
    RS1979

    Motorcraft 2 barrel Carburetor for sale D9EE APA 120.00 9B9 photos

    Hello I have a newly rebuilt carburetor. Its a 2 barrel. Can provide receipts. In addition, barely 30 miles on it. I swapped my 4 cylinder into a 302

    RS1979 10-11-2021, 07:48 PM Go to last post
  • Recent Forum Posts

    Chuck W

    So, I did a thing. '85 Marquis LTS

    The hub ID is the same between the wheels, so I just used the 9" 5-lug drums I had as a template. I located the bores on some 2-1/2" exhaust

    Chuck W Today, 07:42 AM Go to last post
    87gtVIC

    So, I did a thing. '85 Marquis LTS

    Nice work. How does one go about drilling out the drum for 5 lugs? Is there some kinda template available to ensure everything is aligned properly?

    87gtVIC Today, 02:27 AM Go to last post
    stangPlus2Birds

    New Member

    WOW, SUPER NICE CAR!


    Some tips for asking questions:
    Use an Informative topic Title. Good: "Rear drum brake problem on

    stangPlus2Birds Today, 02:01 AM Go to last post
    Fast_4_Eye

    New Member

    Sorry for the late reply, I'm very excited to learn more about these older cars and will make sure to take car of her well


    Fast_4_Eye Yesterday, 11:51 PM Go to last post
    Fast_4_Eye

    New Member

    I will post the pictures as soon as I can figure out how to upload them lol. I just got new tires and did a nice polish and wax to get the scratches out.

    Fast_4_Eye Yesterday, 11:18 PM Go to last post
  • Follow & Like FEP!

    Instagram