- Dealer brochures
- Factory repair guides
- Period magazine coverage
- Ads and promotional materials
- and much, much more!
Click on the tab above that says "The Library," or click on the image to the left to start browsing.
I thought so too, that is why I bought them... just have not received them yet.
bluemax 05-18-2024, 02:26 PMThose are very nice. I saw a set on a car last week which were peeling.
KevinK 05-18-2024, 02:10 PMHello Sebastian, I left a message requesting a status on delivery of these parts.
Please respond and let me know what is going on.
Located in Los Angeles
Original vintage marchal fog light covers 750
For ford mustang foxbody or
Factory radio just removed. Includes knobs, brackets, harness, amp and Amp switch. I can email photos upon request. $80 plus shipping. Will consider
KevinK 05-16-2024, 04:19 PMThanks. I will give it a try. I think my upload folder is full at 110 photos. I cannot delete them. I tried. It also says after 24 hours they will
KevinK 05-14-2024, 07:35 PMI did a video on my 1985 Mercury Capri 5.0L and did a little review of the RS v. GS mystery. I probably misspoke or made an error here and there. Do
75coug Yesterday, 09:03 PMWell, I was wrong about things being OK mechanically.
I went to reinstall the wheels/tires and discovered both inner tie rods were very loose.
They are the CNC heads, so that's good.
Appreciate the input and I will look up that fella on YouTube!
In honesty, since I do not race and
Those Edelbrock heads don't flow that great and the cam you posted is on the smaller side. Figure around 280-310 at the flywheel with the first build.
Hemlock Yesterday, 01:14 AMI used their 'chart' and it came in at the 650 range. I also used the 570 SA carb on my Mustang in my signature and liked it. I may go with the 670.
richpet 05-18-2024, 07:20 PM