Q: So the only Foxes sold there officially by Ford were the 1979s? And you think there were only 400 of them?
A:Yes '79 and only in 2.3l Turbo. I had this information from a friend, founder of the Mustang Club de France, owner of one of the oldest running Mustang (VIN #145, car of movie "Le Gendarme de St-Tropez" and many french video clips and soaps), a guy who has one of the highest knowledge on Mustangs in France ... I have no official information from Ford France, they send me back to my club
What is the story on your particular car? What has been done to it that is necessary for legalization in France, and do you have pics?
My car was sold new in Switzerland in Nov, 5th 1979, licensed Dec, 22th 1979 ... I guess it was a show-room car as it had all graphics installed and was sold pretty late (i haven't tried to contact it's original owner, but I have his address in the Ford Service manual, so maybe one day when I'll ...
Vortech T-REX Fuel Pump. Pump was tested last night, in working order. $125 shipped.
PM me if interested. Thanks, Mike
Do you still have these available? Looking to replace my worn out holders. Thanks
1fordfan Yesterday, 10:48 AMThe problem is again that a large port Cleveland responds best to a stock dual plane design, best still is the Boss aluminum or 1973 HO 351 replacement
xctasy Yesterday, 06:52 AMThanks for the response. Ive been thinking about investing in a 351c for my 1980 mustang, I was thinking about going with trick flow efi kit for it. Ill
Tuitasi32 01-16-2021, 08:31 PMNice glove box. Some minor scuffs on the front. No lock or latch. Will update if I locate the lock. $40 plus shipping.
Pictures are too
Cam timing is the other part of the equation, correct? probably the really important part?
hazelj80 Today, 06:31 PMI removed the entire shifter shaft from my 79 zephyr(linkage was already missing). I left the indicator in the dash though. The shaft was pretty easy
massacre Today, 06:29 PMIf PTV is your only criteria I guess so.
Use an LS for example. True flat tops and a 12-15 degree valve angle. .600" lift without issues
that makes sense to me better to start with a valve that is at less of an angle (11) vs more (20).
hazelj80 Today, 06:17 PMYou have to remove the baffles, shorten the legs in the cover, then reinstall the baffles. Mine have enough clearance for venting and filling with oil,
mudgepondexpress Today, 06:16 PM