Q: So the only Foxes sold there officially by Ford were the 1979s? And you think there were only 400 of them?
A:Yes '79 and only in 2.3l Turbo. I had this information from a friend, founder of the Mustang Club de France, owner of one of the oldest running Mustang (VIN #145, car of movie "Le Gendarme de St-Tropez" and many french video clips and soaps), a guy who has one of the highest knowledge on Mustangs in France ... I have no official information from Ford France, they send me back to my club
What is the story on your particular car? What has been done to it that is necessary for legalization in France, and do you have pics?
My car was sold new in Switzerland in Nov, 5th 1979, licensed Dec, 22th 1979 ... I guess it was a show-room car as it had all graphics installed and was sold pretty late (i haven't tried to contact it's original owner, but I have his address in the Ford Service manual, so maybe one day when I'll ...
5. Major Body Parts Require Pics - Due to concerns with fairness about certain ads, pictures of the parts are required for the following parts:
Do you have any pics of the gauge cluster?
ITdude87 05-31-2023, 11:00 AMCleaning out the storage building of all Foxbody Mustang parts.
Items Available:
1979-1990 Front fenders (2 sets) $150 per set
One difference is front mounting of straps to frame on 81 and later models. Pin style vs t-notch end.
NPD has pics.
I have a 9v Craftsman Hitemp infrared thermometer tool. Reads -58F to 1000F.
Is handy around the house too checking all kinds of item temps, winter
That location is a great spot for the adjustable proportioning valve. It bolts up to the factory holes. Use a 7/16-24 to 1/8" NPT adapter.
Two86fiveoh's Yesterday, 06:23 PMIt sounds like the reading between the "M" and "A" should be OK with the 195 thermostat then? It doesn't go much higher than that
ITdude87 Yesterday, 04:15 PMBoth my 2.3 truck and car read up to the N of NORMAL in our Mich weather. Motorcraft 192-195thermostats in both.
This week, driven freeway and