Thanks. I will give it a try. I think my upload folder is full at 110 photos. I cannot delete them. I tried. It also says after 24 hours they will
KevinK 05-14-2024, 07:35 PMSee if post #7 in the thread below is any help...
http://vb.foureyedpride.com/showthre...43#post1952043
Thanks for the offer, but I've got the later one on my car. It works fine, but if I came across a good condition, functional panel for a reasonable price,
85GTGuy 05-14-2024, 05:29 PMOk, I was not aware of that variation. I thought there were only 3 types for 83-86 excluding the rear defrost addition
1. No ac
Is it the 83 to mid-85 panel? Or the mid-85 to 86 panel?
In other words (no pun intended), does it have "Heat" and "Hi-Lo",
Just picked up a decent hvac panel at a local pick n pull. Works smoothly. Top 2 screw hole mounting tabs are broken off but probably could get by with
KevinK 05-13-2024, 01:56 PMI have a 750 ProForm on my 331 and have also ran a 650 Brawler on the same car/engine. Driveability is fine with both. I really didn't have to mess with
Broncojunkie Today, 03:47 PMReplaced the vent valve last night. Easy peasy.
There was a good “woosh” of air when I got the old one unscrewed, so we’ll
Thanks for the info. Unfortunately, what I posted is exactly what is on the door tag. There is no "6". I will check the windshield. I would
KevinK Today, 01:40 PM1FABP27M7GF228929 is an invalid VIN (the check digit "7" is not valid for the other 16 characters). The correct check digit for 1FABP27MxGF228929
FoxChassis Today, 12:59 PMI tried the link to decode the door tag but it says bad VIN just like it did yesterday for the buck tag. I try to be self sufficient.